Rust Grip is specially designed as a cost reducing coating against rust. Cost reducing because Rust Grip can be instantly applied over older surfaces and previous coat­ings. Rust Grip is designed to resist weathering that promotes rust, and to withstand acids, salts, petrochemical products and caustic materials. Encapsulates rust and corrosion forming an airtight and moisture proof barrier virtually eliminating future rust and corrosion.

Rust Grip is a one-part polyurethane coating that combines with atmospheric moisture to cure. Upon curing, Rust Grip provides a protective coating of superior adhesion, flexibility and abrasion/impact-resistance. It is resistant to chemical solvents and acid splash.

Originally designed for metal surfaces, Rust Grip demonstrates excellent adhesion to wood, concrete, fiberglass and many other substrates. Rust Grip is designed for the encapsulation of and adherence to tightly bonded surfaces of lead-based and other toxic paints as well as rusted surfaces. This unique ability is accomplished by the curing mechanism of the base polymer. The coating (having a low initial viscosity) wets the rusty surface, penetrates to the foundation of the rust’s origin where curing begins, and the polymer begins to swell, developing an interlocking network between the pores of the surface and the coating. Rust Grip is highly recommended as a base coat for SUPER THERM on metal. No pot life, no catalyzation, no two-part mixing. Can substitute for zinc-rich primer requiring no white sandblasting. Can be applied over rusted surfaces after loose/flaking material is removed. High humidity quickens dry/cure cycle.

RUST GRIP Attributes

Extremely tough/durable

• Abrasion and mechanical impact resistant
• Flexible and will not crack or peel from expansion and contraction during extreme temperature variations
• Resistant to continuous immersion in acids, salts, alkalis, oils, solvents and other refined chemicals
  

Encapsulate toxic materials

• EPA approved to encapsulate toxic materials, including lead based paint and asbestos, eliminating the need for expensive procedures to remove the toxic material.
• Applied to dry or wet surfaces
  

Protective Coating

• Applied to new surfaces to prevent future corrosion problems, and older surfaces over the existing corrosion to prohibit further corrosion
• Extremely weather resistant and UV resistant for long life in adverse environments
• High temperature resistance, up to 392ºF
  

Easy to apply

• Roller, brush or spray application
• One coat application that dries in 2 hours
• Will penetrate and encapsulate up to 18 coats of other paint
  

RUST GRIP Cost Benefits

• Requires less preparation time with no expensive and dirty sandblasting requirements
• Encapsulate toxic materials, including lead based paint and asbestos, eliminating the need for expensive procedures to remove the toxic material and its disposal
• There’s no need to risk poisoning workers or contaminating the environment
• Applied to new surfaces to prevent future corrosion problems, and older surfaces to prohibit further corrosion reducing repair cost.
  

Environmentally safe

• Without question the most effective versatile encapsulating and pore penetrating coating on the market
• Protective coating savings will more than offset the cost of repair/replacing damage from corrosion or costly removal of toxic material
• Is ranked #1 in Field Testing against all other corrosion control coatings
• Testing has shown life expectancy to be 25+ years
• Eliminates need for costly sandblasting and grinding
• Eliminates need for costly toxic waste removal

Information Request Form